(661) 297-2249

About us

Associates ***

Search

 

(661) 297-2249

     
Home | Your Link | Your Link | Your Link | Your Link | Your Link | Your Link | Your Link | Your Link

  Member Login

Login Name
Password

 

1980 Suzuki GS1100L.

          

 Parts needed:

I'm Reviving this classic which apparently went down on the right side as that's where the all the superficial damage is.

I need the right front brake lever. Right cover is in pretty bad shape. Need the ignition cover.

Section Title  

Choke knob and 2" cable. I have the long cable down to the carbs.

Need new tail light lens.
Also (top center) is there a fastener or plug to fill the hole?

 
 

The  round headlight proves it is the 'L' model.
The others have a rectangular light.

Left electrical cover is missing.

 

Signal Control unit: Outlined in white below
With considerable trouble shooting, wire tracing and swear words I think I have isolated the turn signal problem down to the above 'Signal control' box. The relay below seems ok since I can feel it click when I apply power through it. My manual (Clymer Suzuki GS1100 Fours - 1980-1981) shows a different 'Black Box' relay and doesn't say there is a different one for the 'L' model. So it may be that someone replace the black box signal relay shown on page194 fig 38 of the manual with this other one.
 
Another reason I'm suspicious is that there are three wires going to the relay socket but only two prongs on the relay. (hard to see on the pictures below)
Do you have the manual pictured black box signal relay?
The extender for the rear signal is flexible. The extender for the front is not and breaks if you drop the bike. I just replaced the front with pretty new ones and dropped it in the drive way. That's how I know. I want to replace the front two with flexible signals like these on the rear.  DO YOU HAVE ANY OF THESE?
My Tach cable is broken. It is 22" long. I NEED ONE OF THESE.
 
Bike Deals!
Search

 


 




 

Copyright 2002 Your Business Name, All rights reserved.


I picked up a tank off of eBay, have cleaned and coated the inside with a polymer lining. I also painted it the brightest yellow I could find.

 

Home, Back, Next, Top, End, Search

  

Need the ignition cover.                     The baffle in the muffler is loose so I suppose I need a new muffler?

Right front brake lever is damaged. Need to replace it.  (I got the Right turn signal already.)

Right cover is in pretty bad shape but the left one is missing completely.

An oil cooler has been added which I hope is responsible for the Oil Light being on.

Home, Back, Next, Top, End, Search

End

 

Search,   Send mail to Webmaster@Software-Custom.com with questions or comments about this web site.